-----> Gateway 3DS Installer Plugin 1.1a for Supercard DSTWO <-----

Instructions:

Step 1 (Gateway 3DS Installer):

1) Place the _dstwoplug directory in the root of the Micro SD card that you use with Supercard DSTWO.

2) Place the Launcher.dat in the root of the SD card that you use on 3DS.

3) Insert the SD card into 3DS and the Micro SD card into SC DSTWO.

4) Turn on the 3DS, boot the SC DSTWO and run the Gateway Installer.

5) Press "A" to install, and then press again "A" to power down, or press the home button to return to main menu.


---> INFO: You need to repeat this step only if you run something in "DS MODE".

---> STRONGLY RECOMMENDED: For a better understanding, view the attached image.




Step 2 (Launching Gateway Mode):

1) Turn on your 3DS, and go to "System Settings".

2) Go to "Other Settings" and tap on "Profile".

3) Tap on "Nintendo DS Profile" and Wait for 5 to 8 seconds to reboot into GW Mode.


---> INFO: You need to repeat this step in every power cycle.




Step 3 (Preparing Micro SD for Red Gateway):

1) Insert in your PC the Micro SD card you want to use with the Red Gateway Card.

2) Format the Micro SD card in FAT32 (ATTENTION: when formatting you will lose all data on the Micro SD card).

3) Download Win32 Disk Imager from this link: http://sourceforge.net/projects/win32diskimager/files/latest/download

4) Start Win32 Disk Imager and select file open button, choose all file types to list .3DS and select your file.

5) MAKE SURE TO SELECT THE CORRECT DEVICE in Win32 Disk Imager drop down list.

6) Select Write, double check correct target device and yes to the pop-up confirm overwrite window.

7) Insert Micro SD into Red Gateway Card.

8) Insert  Red Gateway Card in your 3DS and enjoy!






-----> "GW_INSTALL.ini", "GW_INSTALL.bmp", "READ ME! [ENG].png", "Read Me! [ITA].png" created by Diablos90.

-----> "GW_INSTALL.nds" and "Launcher.dat" created by Gateway 3DS Team.